Mechatronic Art and Music

These are the four final projects from the 2020 "Mechatronic Art & Music" course. Each student was tasked with opened ended assignment of designing and creating their own electro-mechanical device related to their personal creative practice. Carl Burgin, Trevor Bock, Charles Danner, Cy Krafft & Kai-Luen Liang

Kai-Luen Liang

Tomorrow There Will Be Wind ( Automatic Windchimes )
A performance of playing an Arduino controlled set of wind chimes.
Vibration motors are activated through a motor driver creating divisions and
polyrhythms based on various “states.” First iteration prototype with beer
bottle activation.


 

Trevor Bock

4-Note Bottle Blowing Instrument

I have always loved the angelic sound that is produced by blowing into an empty glass
bottle. The combination of wind noise and the ringing sine wave tone that resonates out of the
bottle creates a fascinating timbre that is impossible to perfectly replicate digitally. What if you
could mechanically create this sound and produce beautiful melodies to perform with it? This is
what inspired me to create the 4-Note Bottle Blowing Instrument. This device contains four
small fans attached to DC motors mounted in a specific way to effectively blow air into each of
the bottles. This causes them to resonate and create a fairly loud sine tone. Each bottle is
individually tuned by raising and lowering the amount of water inside them. Using an Arduino,
the instrument will then perform a sequence of notes by fading the fans in and out from left to
right. This allows musicians to tune each bottle accordingly and create any four part melody
they desire.


 

Cy Krafft

This work in progress was inspired by a love of old school liquid light shows and a fascination
with the precise engineering of the inside of a moving head. The goal is to repurpose the
internal mechanisms from used Clay Paky Alpha Spot and Alpha Wash fixtures to create an
animating liquid light show in the beam of the fixtures.
I began with the Alpha Wash fixtures due to the less complex internal layout. However, due to
the limited range of beam effects in the fixture, the color wheels were my first choice for
modification. The challenge with the color wheels was adapting the rotational movement of the
color wheels into the vertical movement of a plate.
The first iteration of this design is made of two clear discs connected by a silicone tube to create
a sealed container that is then filled with the dyed oil and water. The two discs can then be
oscillated against each other through the use of a ridged gear on the inside of the metal plates
holding the discs. This creates the fluid movement associated with traditional liquid light shows.
In addition, the entire mechanism can be moved in and out of the beam to add or remove the
effect. The prototype of this iteration is still in development


 

Charles Danner


 

Mira Spremich

Endure Yikai Luc Wu, Kai-Luen Liang, Madyson Thornquest, Max Harper, Nick Chang

Fallon Williams

Originally located on the back wall of the MOD, IRIS was a 3-dimensional automated aperture that opened to about 17-ft in diameter to reveal a lit cyclorama in its opening. For the Virtual Campus, we will be modeling the iris in 3D software, then using lighting software to create various lighting looks. Christian Mejia (MFA2, […]

Kathleen Fox

Don't Let Me Be Lonely Don’t Let Me Be Lonely is an architectural projection performance inspired by Claudia Rankine’s book of poems of the same name. The projection mapping explores loneliness as it exists at CalArts both before and during the COVID19 Crisis. Rankine defines loneliness as “What we cannot do for each other.” This […]

Kai Luen Liang

Flag ASMR “On Sept 11th, 2001 I watched the twin towers falling with my father. Glued to the TV. A silent demolition. An American reality TV show. In the weeks that followed, I started to see American flags everywhere. Especially from immigrants of all colors, flying the flag out of a sense of fear of […]

Dongpu Ling

ML Landscape I am interested in the inaccurate and unpredictable result that a machine can make. In order to understand its “mind”, I train the machine using images that have not been cropped, to see how it understands a thing that has not be seen before.

Jiayu Zhang

Unbuilt Door Unbuilt Door is a collaborative sound installation between Jiayu Zhang and Joana P. Cardozo during the emergency state of the COVID-19 pandemic in Spring 2020. Jiayu and Joana were studio neighbors at CalArts. This piece offers an imagination practice for the participants to visualize the border of their individual space. The participants are […]

Daniel Corral

15 Pendulums This is a Unity-based video piece, inspired by Reich’s Pendulum Music, but with a microtonal tuning based on a 1-3-5-7 combination-product set. The fundamental of this tuning is an upper 2/1 partial of the Schumann resonance 7.83 Hz. This Schumann resonance is basically the resonant frequency of the Earth’s electromagnetic field. Here is […]